IS200ECTBG1ADA GE Exciter Contact Terminal Board
General info
| Manufacture | GE |
| Item No | IS200ECTBG1ADA |
| Article number | IS200ECTBG1ADA |
| Series | Mark VI |
| Origin | United States（US） |
| Dimension | 85*11*110(mm) |
| Weight | 1.1 kg |
| Customs Tariff Number | 85389091 |
| Type | Exciter Contact Terminal Board |
Detailed data
GE General Electric Mark VI
IS200ECTBG1ADA GE Exciter Contact Terminal Board
The GE IS200ECTBG1ADA is a contact contact terminal card (ECTB) whose main function is to support the input and output of contact contacts. Since the is200ectbg1a is labeled 1A, it will only work in redundant mode, and the model is able to control the relay's contact output and the client's contact input.
The output and input of the EX2100 excitation contact are supported by the IS200ECTB terminal board. There are two variations; The ECTBG1 board is used for redundancy control, while the ECTBG2 board is used for simple control, with two run outputs on each board to drive client locking managed by the EMIO board, in addition, the EMIO board is responsible for four generic Form-C contact outputs.
This product has two end bands along one edge. There are two three-position plugs on the board surface. In addition the board has three D-shell connectors connecting the cable along one long side. The board is shaped (notched) along both long sides.
Application
The trip relays in controllers M1, M2 and C are K1 and K2 respectively. General relays are K1GP ~ K4GP. Terminal blocks TB1 and TB2 have two fixing screws that can be removed. The cables connecting the EBKP backplane to the EMIO boards M1, M2 and C are connected using three 25pin sub-D connectors J405, J408 and J415 respectively. The J13M1 and J13M2 plugs from the M1 and M2 power supplies provide 70v DC for wetting the contacts.
