GE IS220YTURS1A Turbine Input/Output Pack
General info
| Manufacture | GE |
| Item No | IS220YTURS1A |
| Article number | IS220YTURS1A |
| Series | Mark VI |
| Origin | United States（US） |
| Dimension | 180*180*30(mm) |
| Weight | 0.8 kg |
| Customs Tariff Number | 85389091 |
| Type | Turbine Input/Output Pack |
Detailed data
GE IS220YTURS1A Turbine Input/Output Pack
The IS220YTURS1A has three I/O packages in total, the Main Turbine Protection YTURS1A provides the electrical interface to one or two IONets and a Main Protection terminal block. The YTUR plugs into the TTUR terminal block and handles four speed sensor inputs, bus and generator voltage inputs, shaft voltage and current signals, eight flame sensors, and outputs from the main circuit breaker. The speed interface accommodates up to four passive magnetic speed inputs with a frequency range of 2 to 20,000 Hz. The IS220YTURS1A requires a different Mark VIeS safety I/O type. The TTURS1C terminal block has the Main Turbine Protection safety I/O type, while the TRPAS1A and TRPAS1A terminal blocks both provide different inputs; 4 speed inputs and 8 flame inputs respectively. The TRPGS1B terminal block has 3 safety I/O types that monitor trip relay outputs, and the final compatible TRPGS2B terminal block is aligned in terms of safety I/O types with 1 emergency stop.
Frequently asked questions about the product are as follows:
-What is the IS220YTURS1A Turbine I/O Pack?
It interfaces with sensors and actuators to monitor and control key turbine parameters.
-What are the main functions of the IS220YTURS1A?
Supports a variety of turbine related signals including speed, temperature, pressure, and vibration.
-How do I configure the IS220YTURS1A?
Connect the module to the Mark VIe system. Configure the I/O parameters using ToolboxST. Map the I/O signals to the control system.
