DS3800NVMB1A1A GE Voltage Monitor Board
General info
| Manufacture | GE |
| Item No | DS3800NVMB1A1A |
| Article number | DS3800NVMB1A1A |
| Series | Mark IV |
| Origin | United States（US） |
| Dimension | 85*11*120(mm) |
| Weight | 0.5 kg |
| Customs Tariff Number | 85389091 |
| Type | Voltage Monitor Boardor |
Detailed data
DS3800NVMB1A1A GE Voltage Monitor Board
The DS3800NVMB is a Voltage Monitor Board developed by GE.It's a part of the Mark IV Speedtronic system.
CP-S.1 series single-phase switching power supply
Single phase 24 V DC switching power supply, from 3 A to 40 A
Main advantages
-Complete product line with 24 V DC output: from 72 W to 960 W, suitable for various industries, especially in the OEM field.
-Wide range AC/DC input, very comprehensive certification, including DNV, and the EMC level of CP-S.1 can be installed in the ship's cabin, with good global universality.
-Low efficiency of 89%, high efficiency of 94%, low power consumption, saving customers operating costs, and meeting environmental requirements.
-Provide a 150% power margin with a duration of 5 seconds, capable of reliably starting loads with impulse currents Narrow width, saving valuable installation space.
Troubleshooting and Maintenance
Here are some general troubleshooting steps you can follow for the DS3800NVMB1A1A voltage monitoring board:
Check the power supplyFirst make sure the board is receiving the correct voltage. Look for signs of overheating, burn marks, or physical damage on the board. Make sure all wiring and connections are secure. Test the inputs and outputs and use a multimeter or other diagnostic tool to verify that the board is properly monitoring voltage levels. Replace faulty components such as capacitors or resistorsIf they are damaged, they need to be replaced.
