ABB SA910S 3KDE175131L9100 Power Supply
General info
| Manufacture | ABB |
| Item No | SA910S |
| Article number | 3KDE175131L9100 |
| Series | 800XA Control Systems |
| Origin | Sweden |
| Dimension | 155*155*67(mm) |
| Weight | 0.4kg |
| Customs Tariff Number | 85389091 |
| Type |
Power Supply
|
Detailed data
ABB SA910S 3KDE175131L9100 Power Supply
ABB SA910S 3KDE175131L9100 power supply is a product in ABB SA910 series. SA910S power supply is used in various systems to provide stable DC voltage for control systems, PLCs and other key equipment that require reliable power supply.SA910S power supplies typically provide 24 V DC output for powering control systems, sensors, actuators, and other devices. Output current is typically between 5 A and 30 A.
The SA910S ensures minimal energy loss and reduced heat generation, making it suitable for long-term continuous operation in industrial environments. The unit has a compact design and can be easily installed in industrial control panels and mounted on a DIN rail.
It can withstand harsh industrial environments and has a temperature range of -10°C to 60°C or higher, depending on the application.
The SA910S typically supports a wide input voltage range, allowing the use of different power grids in different regions.
Some models can also support DC input voltage, making it flexible for different power supply configurations.
The power supply has built-in overvoltage, overcurrent and short-circuit protection to protect the unit and connected loads from damage caused by power spikes or connection faults.
Frequently asked questions about the product are as follows:
-What are the output voltage and rated current of the ABB SA910S 3KDE175131L9100?
The ABB SA910S power supply provides a 24 V DC output with a rated current typically between 5 A and 30 A.
-Can the ABB SA910S 3KDE175131L9100 be used in a 24 V DC backup power system?
The SA910S can be used in a backup power system, especially when used with batteries. The power supply can charge the battery while supplying power to the load, ensuring that the system remains operational during a power outage.
-How do I install the ABB SA910S 3KDE175131L9100 power supply?
Mounting the device Secure the device to the DIN rail in a suitable location within the control panel. Connect the AC or DC input terminals to an appropriate power source. Ground properly according to local electrical standards. Connect the output Connect the 24 V DC output terminals to the load. Verify the operation of the device using the built-in LED or monitoring tool.
