ABB CI861K01 3BSE058590R1 VIP Communication Interface
General info
| Manufacture | ABB |
| Item No | CI861K01 |
| Article number | 3BSE058590R1 |
| Series | 800XA Control Systems |
| Origin | Sweden |
| Dimension | 59*185*127.5(mm) |
| Weight | 0.6kg |
| Customs Tariff Number | 85389091 |
| Type | Communication Interface |
Detailed data
ABB CI861K01 3BSE058590R1 VIP Communication Interface
The ABB CI861K01 is a communication interface module designed for use with ABB's AC800M and AC500 programmable logic controllers (PLCs). It communicates with PROFIBUS DP networks, facilitating the integration of PROFIBUS DP devices into control systems.
The CI861K01 supports high-speed communication between the AC800M PLC (or AC500 PLC) and a wide range of PROFIBUS DP-compatible field devices.
The PROFIBUS DP (Distributed Peripheral) protocol is one of the most widely used industrial communication standards for automation systems, making it ideal for integrating peripheral devices over fieldbus networks. The CI861K01 seamlessly connects these devices to ABB's PLC systems, providing real-time data transfer and network diagnostics.
Detailed data:
Dimensions: Length approx. 185mm, width approx. 59mm, height approx. 127.5mm.
Weight: Approx. 0.621kg.
Operating temperature range: -10°C to + 60°C.
Humidity: 85%.
ROHS status: Non-ROHS compliant.
WEEE category: 5 (small equipment, external dimensions not exceeding 50cm).
It supports multiple communication protocols, and can easily communicate with different manufacturers and different types of equipment to achieve data interaction and sharing, meeting the complex communication needs in industrial automation systems.
Its current output is factory set to 4-20 mA, and the signal can be configured as "active" or "passive" mode, suitable for different application scenarios and equipment requirements. For the PROFIBUS PA interface, the bus address can be set in a variety of ways, and the factory setting of DIP switch 8 is OFF, that is, the address is set using the field bus, which is convenient and fast to operate. It is also equipped with a display panel, and the buttons and menus on it can be used to perform related settings and operations, so that users can intuitively understand the working status of the module and configure parameters.
Frequently asked questions about the product are as follows:
-What is the ABB CI861K01?
The CI861K01 is a PROFIBUS DP communication interface module for integrating PROFIBUS DP devices with ABB AC800M and AC500 PLCs. It allows the PLC to communicate with a wide range of field devices.
-What devices can be connected to the CI861K01?
Remote I/O modules, motor controllers, actuators, sensors , valves, and other process control devices.
-Can the CI861K01 operate as both a master and a slave?
The CI861K01 can be configured to operate as either a master or a slave on a PROFIBUS DP network. As a master, the module controls communications on the network, while as a slave, the module responds to commands from the master device.
