ABB CI858K01 3BSE018135R1 DriveBus Interface
General info
| Manufacture | ABB |
| Item No | CI858K01 |
| Article number | 3BSE018135R1 |
| Series | 800XA Control Systems |
| Origin | Sweden |
| Dimension | 59*185*127.5(mm) |
| Weight | 0.1kg |
| Customs Tariff Number | 85389091 |
| Type | DriveBus Interface |
Detailed data
ABB CI858K01 3BSE018135R1 DriveBus Interface
The DriveBus protocol is used to communicate with ABB Drives and ABB Special I/O units. DriveBus is connected to the controller via a CI858 communication interface unit. The DriveBus interface is used for communication between ABB Drives and AC 800M controller.
The DriveBus communication is especially designed for sectional drive applications for ABB rolling mill drive systems, and ABB paper machine control systems. The CI858 is powered by the processor unit, via the CEX-Bus, and therefore does not require any additional external power source.
CI858K01 supports PROFINET IO and PROFIBUS DP communication protocols, and can be seamlessly integrated with PROFINET and PROFIBUS networks in industrial automation systems. It provides the flexibility to use these protocols to communicate with various devices such as I/O systems, drives, controllers, and HMIs.
Detailed data:
Maximum units on CEX bus 2
Connector Optical
24 V Power consumption Typical Typical 200 mA
Operating temperature +5 to +55 °C (+41 to +131 °F)
Storage temperature -40 to +70 °C (-40 to +158 °F)
Corrosion protection G3 in accordance with ISA 71.04
Protection class IP20 in accordance with EN60529, IEC 529
Marine certifications ABS, BV, DNV-GL, LR
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
Frequently asked questions about the product are as follows:
-What is the ABB CI858K01 used for?
The CI858K01 is a communication interface module used to connect ABB AC800M or AC500 PLC systems to PROFINET and PROFIBUS networks.
-How is the CI858K01 configured?
It can be configured using ABB's Automation Builder or Control Builder software. These tools allow users to set network parameters, configure devices, map I/O data, and monitor the communication status between the PLC and connected devices.
-Can the CI858K01 handle redundant communications?
Support for redundant communications ensures high availability and continuous operation. Redundant communications are essential for mission-critical applications where downtime is unacceptable.
-Which PLCs are compatible with the CI858K01?
The CI858K01 is compatible with ABB AC800M and AC500 PLCs, allowing these PLCs to communicate with PROFIBUS and PROFINET networks.
