ABB AO810 3BSE008522R1 Analog Output Module
General info
| Manufacture | ABB |
| Item No | AO810 |
| Article number | 3BSE008522R1 |
| Series | 800XA Control Systems |
| Origin | Sweden |
| Dimension | 45*102*119(mm) |
| Weight | 0.1kg |
| Customs Tariff Number | 85389091 |
| Type | Analog Output Module |
Detailed data
ABB AO810 3BSE008522R1 Analog Output Module
The AO810/AO810V2 Analog Output Module has 8 unipolar analog output channels. To supervise the communication to the D/A-converters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision, which is reported when supply voltage to output circuitry is to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output current is less than the output set value and the output set value is greater than 1 mA.
Detailed data:
Resolution 14 bits
Isolation Grouped and ground isolated
Under/overrange -/+15%
Output load ≤ 500 Ω (power connected to L1+ only)
250 - 850 Ω (power connected to L2+ only)
Error 0 - 500 ohm (current) max. 0.1%
Temperature drift 30 ppm/°C typical, 60 ppm/°C max.
Rise time 0.35 ms (PL = 500 Ω)
Update cycle time ≤ 2 ms
Current limitation Short-circuit protected Current limited output
Maximum field cable length 600 m (656 yards)
Rated insulation voltage 50 V
Dielectric test voltage 500 V AC
Power consumption 2.3 W
Current consumption +5 V Modulebus max. 70 mA
Current consumption +24 V Modulebus 0
Current consumption +24 V external 245 mA
Frequently asked questions about the product are as follows:
-What is ABB AO810?
ABB AO810 is an analog output module used to provide voltage or current signals to control devices such as actuators, control valves, motors and other process control devices.
-What types of analog signals can AO810 output?
It can output voltage signals 0-10V and current signals 4-20mA.
-Can AO810 be used to control motors?
AO810 can be used to output analog signals to control variable frequency drives (VFDs) or other motor controllers. Because this allows precise control of motor speed and torque in applications such as conveyors, mixers or pumps.
