ABB AO801 3BSE020514R1 Analog Output Module
General info
| Manufacture | ABB |
| Item No | AO801 |
| Article number | 3BSE020514R1 |
| Series | 800XA Control Systems |
| Origin | Sweden |
| Dimension | 86.1*58.5*110(mm) |
| Weight | 0.24kg |
| Customs Tariff Number | 85389091 |
| Type | Analog Output Module |
Detailed data
ABB AO801 3BSE020514R1 Analog Output Module
The AO801 Analog Output Module has 8 unipolar analog output channels. The module performs selfdiagnostic cyclically. A low internal power supply sets the module in INIT state (no signal from the module).
AO801 has 8 unipolar analog output channels, which can provide analog voltage signals to multiple devices at the same time. The module has a resolution of 12 bits, which can provide high-precision analog output and ensure the accuracy and stability of the output signal.
Detailed data:
Resolution 12 bits
Isolation Group-by-group isolation from ground
Under/over range - / +15%
Output load 850 Ω max
Error 0.1 %
Temperature drift 30 ppm/°C typical, 50 ppm/°C max
Rise time 10 µs
Update period 1 ms
Current limit Short-circuit protected current-limited output
Maximum field cable length 600 m (656 yds)
Rated insulation voltage 50 V
Dielectric test voltage 500 V AC
Power consumption 3.8 W
Current consumption +5 V Modulebus 70 mA
Current consumption +24 V Modulebus -
Current consumption +24 V external 200 mA
Supported wire sizes
Solid wire: 0.05-2.5 mm², 30-12 AWG
Stranded wire: 0.05-1.5 mm², 30-12 AWG
Recommended torque: 0.5-0.6 Nm
Strip length 6-7.5mm, 0.24-0.30 inches
Frequently asked questions about the product are as follows:
-What is ABB AO801?
ABB AO801 is an analog output module in ABB AC800M and AC500 PLC systems, used to output voltage or current signals to control field devices in process control systems.
-What types of analog signals does AO801 support
Supports voltage output 0-10 and current output 4-20m, which is the standard for controlling field devices such as valves, motors and actuators.
-How to configure AO801?
AO801 is configured using ABB's Automation Builder or Control Builder software. These tools allow setting output range, scaling and I/O mapping, as well as configuring the module to meet specific application requirements.
