ABB 07DI92 GJR5252400R0101 Digital I/O module 32DI
General info
| Manufacture | ABB |
| Item No | 07DI92 |
| Article number | GJR5252400R0101 |
| Series | PLC AC31 Automation |
| Origin | Sweden |
| Dimension | 198*261*20(mm) |
| Weight | 0.5kg |
| Customs Tariff Number | 85389091 |
| Type |
PLC AC31 Automation
|
Detailed data
ABB 07DI92 GJR5252400R0101 Digital I/O module 32DI
The digital input module 07 DI 92 is used as a remote module on the CS31 system bus. It contains 32 inputs, 24 V DC, divided into 4 groups with the following features:
1)The 4 groups of inputs are electrically isolated from each other and from the rest of the device.
2)The module occupies two digital addresses for inputs on the CS31 system bus.
The unit works with a supply voltage of 24 V DC.
The system bus connection is electrically isolated from the rest of the unit.
Addressing
An address must be set for each module so that
the base unit can correctly access the inputs and outputs.
The address setting is done via the DIL switch located under the slide on the right side of the module housing.
When using the base units 07 KR 91, 07 KT 92 to 07 KT 97
as bus masters, the following address assignment applies:
Module address, which can be set using the address DIL switch and switches 2...7.
It is recommended to set the module address for 07 KR 91 / 07 KT 92 to 97 as bus masters to: 08, 10, 12....60 (even addresses)
The module occupies two addresses on the CS31 system bus for inputs.
Switches 1 and 8 of the address DIL switch must be set to OFF
Note:
Module 07 DI 92 only reads the position of the address switches during initialization after power-up, which means that changes to the settings during operation will remain ineffective until the next initialization.
